Follow these easy steps to get your Electrolux 911 239 008 Dishwasher up and running in no time.

1. Check for Transport Damage

Inspect the dishwasher for any transport damage. Under no circumstance should a damaged appliance be connected. In case of any damage, contact your vendor.

2. Ensure Compatibility

Verify that the nominal voltage and type of current specified on the rating plate match those used at the installation site.

3. Remove Transport Clips

Prior to using the dishwasher for the first time, remove all clips securing the dish racks for transport.

4. Install on Firm Floor

Install the dishwasher on a firm floor and adjust to ensure it is stable and level.

5. Water Connection

Connect the inlet hose to the water supply and ensure all connections are secure to prevent leaks.

6. Electrical Connection

Connect the dishwasher to the power supply, observing all local electricity regulations and standards.

7. Leak Prevention System

Ensure the AQUA CONTROL SYSTEM, which prevents water leaks, is functioning correctly.

8. Adjust Water Softener

Set the water softener to match the water hardness level in your area to ensure optimal cleaning performance.

9. Fill with Special Salt

Add special salt to the water softener compartment to prevent limescale buildup.

10. Fill with Rinse Aid

Fill the rinse aid dispenser to help dry dishes without streaks or spots.

11. Start the Dishwasher

Open the tap fully, shut the door, press the ON/OFF button, select the desired program, and wait for the program to start.

Back to Home

Electrolux 911 239 008

;